landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Solenoid - shift > < Switch - starter inhibitor
Page 361
background image

AUTOMATIC TRANSMISSION - ZF 5HP24

44-2-6

REPAIRS

Fluid seal - selector shaft 

$% 44.15.34 

Before disconnecting the battery, ensure all text and 
cautions in the battery disconnection section are 
observed. 
 

 + 

 GENERAL INFORMATION, Electrical 

Precautions.

Remove

1. Position vehicle on lift.
2. Disconnect battery earth lead.

3. Remove nut securing selector lever to selector 

shaft and release lever.

4. Remove 2 bolts securing inhibitor switch guard 

and remove guard.

5. Remove 2 bolts securing inhibitor switch to 

gearbox and remove inhibitor switch from 
selector shaft.

6. Position LRT-44-033/2 to seal recess and fit 

LRT-44-033/1 to LRT-44-033/2. Tighten LRT-
44-033/1
 and remove selector shaft oil seal.

Refit

1. Clean selector shaft and seal recess.

Solenoid - shift > < Switch - starter inhibitor