Land Rover Workshop Service and Repair Manuals

DRIVESHAFTS

47-14

REPAIRS

Bearing driveshaft support  

$% 47.10.41

Remove

1. Remove RH drive shaft seal.

 + 

 DRIVESHAFTS, REPAIRS, Seal - 

drive shaft - front - RH.

2. Remove 4 bolts, remove support housing and 

discard 'O' ring.

NOTE: Do not carry out further dismantling if 
component is removed for access only.

3. Remove oil seal from housing.
4. Remove bearing from housing.

Refit

1. Clean bearing and mating face.
2. Lubricate bearing with clean differential oil. 

 + 

 CAPACITIES, FLUIDS, 

LUBRICANTS AND SEALANTS, 
Lubrication.

3. Using LRT-54-031 fit bearing to housing.
4. Clean seal and mating face.

5. Use LRT-54-028 to fit new oil seal.
6. Clean 'O' ring groove, housing and mating face.
7. Lubricate new 'O' ring and fit to housing.
8. Carefully fit housing and tighten bolts to 22 Nm 

(16 lbf.ft).

9. Fit RH drive shaft seal.

 + 

 DRIVESHAFTS, REPAIRS, Seal - 

drive shaft - front - RH.

M47 0434

LRT-54-031

M47 0435

LRT-54-028