L322 Range Rover Service Procedures
DRIVESHAFTS
REPAIRS
47-9
Refit
1. Clean drive shaft.
2. Fit new gaiter to shaft.
3. Fit new circlip to drive shaft.
4. Position outer joint to shaft, use a screwdriver
to press circlip into its groove and push joint
fully onto shaft.
5. Apply grease from the sachet to the joint.
6. Position gaiter to joint and secure to joint and
shaft with new clips.
7. Fit drive shaft.
Gaiter - inner joint
$% 47.10.16
Remove
1. Remove drive shaft.
2. Release and discard both drive shaft gaiter
clips.
LH drive shaft illustrated.
M47 0421