L322 Range Rover Service Procedures
DRIVESHAFTS
47-4
REPAIRS
26. Tighten new bolt securing tie rod to subframe to
165 Nm (121 lbf.ft), plus a further 90
°
.
CAUTION: Nuts and bolts must be tightened
with vehicle at normal ride height.
27. Top-up differential with oil.
ADJUSTMENTS, Front differential - drain
and refill.
28. Check front wheel alignment.
wheel alignment - check & adjust.
Drive shaft - front - RH
$% 47.10.02
Remove
1. Raise front of vehicle.
WARNING: Do not work on or under a
vehicle supported only by a jack. Always
support the vehicle on safety stands.
2. Remove front road wheels.
3. Remove nuts securing anti-roll bar links and
release links from anti-roll bar.
CAUTION: Use an open ended spanner on
flats provided to prevent ball joint rotating.