L322 Range Rover Service Procedures
FRONT SUSPENSION
REPAIRS
60-3
REPAIRS
Anti-roll bar
$% 60.10.01
Remove
1. Remove undertray.
2. Raise front of vehicle and support under body.
WARNING: Do not work on or under a
vehicle supported only by a jack. Always
support the vehicle on safety stands.
3. Remove front road wheels.
4. Remove nuts securing anti-roll bar links and
release links from anti-roll bar.
CAUTION: Use an open ended spanner on
flats provided to prevent ball joint rotating.
5. If fitted: Remove 2 speed nuts securing anti-
roll bar heatshield to body and 2 bolts securing
heatshield to sub-frame. Remove heatshield.
6. Support front subframe under rear cross-tube.
7. Remove 6 bolts and loosen 2 bolts, arrowed,
securing front subframe. Discard removed
bolts.
8. Lower rear of subframe.
9. Remove remaining anti- roll bar heatshield
fixings and remove heatshield.
10. Remove 2 nuts securing each anti-roll bar bush
clamp.