L322 Range Rover Service Procedures
FRONT SUSPENSION
60-10
REPAIRS
Hub
$% 60.25.01
Remove
1. Raise front of vehicle.
WARNING: Do not work on or under a
vehicle supported only by a jack. Always
support the vehicle on safety stands.
2. Remove road wheel.
3. Release drive shaft hub nut stake.
4. With an assistant applying brakes, remove and
discard drive shaft hub nut.
5. Remove brake disc.
6. Release ABS sensor lead from clip.
7. Release sensor lead from damper, remove
Allen screw and release ABS sensor from hub.
8. Remove nut securing height sensor link to
lower arm and release link.
CAUTION: Use an open ended spanner on
flats provided to prevent ball joint rotating.
9. Loosen bolt securing lower arm to subframe
one quarter of a turn.
10. Remove nut securing lower arm ball joint to
hub.
11. Using LRT-54-027 release lower arm ball joint
and disconnect lower arm from hub.
CAUTION: Ensure ball joint seal is not
damaged. A damaged seal will lead to
premature failure of the joint.
M47 0412
M60 0789
LRT -54-027