landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Supplementary Restraint System (SRS) Precautions|Page 61 > < Supplementary Restraint System (SRS) Precautions|Page 59
Page 56
background image

GENERAL INFORMATION

03-25

Ensure the side impact crash sensors are installed 
correctly. There must be no gap between the sensor 
and the mounting. Use either the fixings supplied 
with the replacement or new fixings and tighten to the 
correct torque.

CAUTION: Take extra care when painting or 
carrying out bodywork repairs in the vicinity of 
the crash sensors. Avoid direct exposure of the 
crash sensors or link harnesses to heat guns, 
welding or spraying equipment. Take care not to 
damage sensor or harness when refitting 
components.

Rotary coupler precautions

CAUTION: Always follow the procedure for fitting 
and checking the rotary coupler as instructed in 
the SRS repairs section. Comply with all safety 
and installation procedures to ensure the system 
functions correctly. Observe the following 
precautions:

l

Do not unlock and rotate the rotary coupler 
when it is removed from the vehicle. 

l

Do not turn the road wheels when the rotary 
coupler is removed from the vehicle.

l

Always ensure the rotary coupler is removed 
and installed in its central position and with 
the front road wheels in the straight ahead 
position - refer to SRS repair section for the 
correct removal and installation procedure.

l

If a new rotary coupler is being installed, 
ensure the locking tab holding the coupler's 
rotational position is not broken; units with a 
broken locking tab must not be used.

Airbag location labels

Airbag location labels are displayed at various 
positions in the vehicle. SRS components have 
additional warning labels displayed on them to 
indicate that particular care is needed when handling 
them. These include airbag modules, crash sensors, 
and seat belt pre-tensioners.

WARNING: It is imperative that before any work 
is undertaken on the SRS system, the 
appropriate information is read thoroughly.

NOTE: The following list indicates possible locations 
and content for warning labels. The exact positions 
and content may vary dependent on model year, 
legislation and market trends.

Passenger side fascia label

Driver/passenger door label

Supplementary Restraint System (SRS) Precautions|Page 61 > < Supplementary Restraint System (SRS) Precautions|Page 59