L322 Range Rover Service Procedures
REAR SUSPENSION
64-12
REPAIRS
9. Remove bolt securing damper to lower arm.
10. Remove damper.
11. Remove and discard gasket.
12. Restrain damper spindle and remove nut
securing upper mounting.
13. Remove washer, upper mounting, dust cover,
support disc and bump stop.
Refit
1. Fit bump stop, support disc, dust cover, upper
mounting and washer to damper.
CAUTION: The support disc is hardened
and must be fitted in the correct position.
2. Fit nut, restrain damper spindle and tighten nut
to 27 Nm (20 lbf.ft).
3. Clean damper to body mating faces.
4. Fit new gasket.
5. Fit damper, fit upper mounting nuts and lightly
tighten.
6. Align damper to lower arm, fit through bolt and
tighten to 110 Nm (81 lbf.ft).
7. Tighten damper upper mounting nuts to 56 Nm
(40 lbf.ft).
8. Pressurise suspension.
ADJUSTMENTS, Suspension - depressurise
and repressurise.
CAUTION: The system must be pressurised
before putting weight of vehicle on
suspension.
9. Fit road wheel and tighten nuts to 140 Nm (103
lbf.ft).
10. Lower vehicle.
11. Position carpet.
12. Return rear seat(s) to their normal position.
13. Fit spare wheel cover.
