landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Description And Operation|Page 2559 > < Description And Operation|Page 2557
Page 24
background image

lamps are active. 
 

SIDE REPEATER LAMP 

 

 

 
The side turn signal lamps are located in the driver and passenger doors, below each door mirror. The lamps are clipped 
into an aperture in the door panel and can be removed by sliding rearwards and releasing the front edge of the lamp from 
the door. The side repeater lamps use a W5W capless bulb which is located in a holder. 
 
The side turn signal lamps have the same functionality as the front and rear turn signal lamps and are operated by the left 
hand steering column multifunction switch or by the hazard flasher switch. The steering column multifunction switch is 
only active with the ignition switch in the ignition position (II), the hazard flasher switch is active at all times. When active, 
the side turn signal lamps will flash at a frequency cycle of 380ms on and 380ms off. If a lamp bulb fails, the remaining 
turn signal lamp bulbs continue to flash at the normal rate. 
 

LEFT HAND STEERING COLUMN MULTIFUNCTION SWITCH 

 

 

 
The steering column multifunction switch is located on the left hand side of the steering column and controls the following 
functions: 
 

Headlamp low/high beam  
Headlamp high beam flash  
Left/right turn signal lamps  

Item  Part Number  Description 

1

 -

Side repeater

2

 -

Bulb holder

3

 -

Clip

Item  Part Number 

Description 

1

 -

RH turn signal lamp

2

 -

Headlamp flash

3

 -

LH turn signal lamp

4

 -

Headlamp high beam

Description And Operation|Page 2559 > < Description And Operation|Page 2557