Range Rover P38
BMW DIESEL
19
REPAIR
Refit
10. Ensure mating faces, dowel and dowel locations
are clean.
11. Position flywheel/drive plate to crankshaft, locate
dowel.
12. Secure flywheel/drive plate with new bolts.
Tighten bolts to:
Flywheel -
105 Nm (77 lbf.ft)
Drive plate -
120 Nm (88 lbf.ft)
13. Manual gearbox: Fit clutch assembly.
See
CLUTCH, Repair.
14.
Automatic gearbox: Fit gearbox. See
AUTOMATIC GEARBOX, Repair.
15. Reconnect battery negative lead.
FRONT COVER GASKET
Service repair no - 12.65.04
Remove
1. Disconnect battery negative lead.
2. Remove cylinder head gasket.
See this
section.
3. Remove sump.
See this section.
4. Remove alternator.
See ELECTRICAL, Repair.
5. Remove crankshaft pulley.
See this section.
6. Remove 4 bolts securing air conditioning
compressor to bracket. Tie compressor aside.
7. Remove 6 bolts securing compressor bracket to
cylinder block and front cover. Remove
compressor bracket.