Range Rover P38
BMW DIESEL
59
REPAIR
CRANKSHAFT SPIGOT BEARING
Service repair no - 12.21.45/01
Remove
1. Remove flywheel/drive plate.
See this section.
2. Remove spigot bearing using LRT-12-109,
discard bearing.
Refit
3. Clean spigot bearing recess in crankshaft.
4. Position new spigot bearing to crankshaft.
5. Drift bearing fully into crankshaft using
LRT-12-110.
6. Fit flywheel/drive plate.
See this section.
TIMING CHAINS AND SPROCKETS
Service repair no - 12.65.12
Remove
1. Disconnect battery negative lead.
2. Remove front cover.
See this section.
3. Remove upper timing chain guide rail.
4. Using a suitable lever, retract lower chain
tensioner plunger. Insert retaining pin
LRT-12-114.
5. Remove lower timing chain tensioner rail.
6. Ensure timing pin LRT-12-108 is still located in
flywheel.