Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)02 · Engine
02 · Engine

Fuel line pressure inspection [lf] (page 2 of 5)

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Fuel System
EngineFuel line pressure inspection [lf] · page 2 of 5

engine stopped.

  1. Follow "BEFORE SERVICE PRECAUTION" before performing any work operations to prevent fuel from spilling from the fuel system. (See BEFORE SERVICE PRECAUTION [LF] .)
  2. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [LF] .)
  3. Disconnect the negative battery cable.
  4. Disconnect the quick release connector (in the engine compartment). (See QUICK RELEASE CONNECTOR (FUEL SYSTEM) REMOVAL/INSTALLATION [LF] .)
  5. Turn the lever of the SST parallel to the hose as shown in Fig. 8 .
  6. Insert the SST quick release connector into the fuel pipe until a click is heard.
ENGINE – Fuel System – figure
Fig. 8: Inserting SST Quick Release Connector Into Fuel Pipe Until Click Is Heard
Courtesy of MAZDA MOTORS CORP.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.