Fuel line pressure inspection [lf] (page 3 of 5)
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- Fuel System
EngineFuel line pressure inspection [lf] · page 3 of 5
- Verify that the quick release connector is firmly connected by pulling it by hand.
- Start the fuel pump using the following procedure:
Using M-MDS or equivalent
- Connect the negative battery cable.
- Connect the M-MDS or equivalent to the DLC-2.
Courtesy of MAZDA MOTORS CORP.
- Start the fuel pump using the "FP" simulation function.
Not using M-MDS or equivalent
- Short the check connector terminal F/P to ground using a jumper wire.
Parts & tools for this job For 2006 Mazda MX-5
- PARTFuel filterSearch: Mazda MX-5 2006 fuel filter
- TOOLFuel pressure test kitSearch: fuel pressure test kit
- TOOLFuel line disconnect toolSearch: fuel line disconnect tool
As an Amazon Associate we earn from qualifying purchases.