Fuel line pressure inspection [lf] (page 5 of 5)
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- Fuel System
EngineFuel line pressure inspection [lf] · page 5 of 5
Courtesy of MAZDA MOTORS CORP.
- Turn the ignition switch to the ON position to operate the fuel pump.
- Operate the fuel pump for 10 s .
- Measure the fuel line pressure.
- If not within the specification, inspect the following:
If it less than the specification:
- Fuel pump unit
- Fuel line leakage
If it exceeds the specification:
- Fuel line clogging
Fuel pressure (Reference)
350-410 kPa {3.57-4.18 kgf/cm2 , 50.8-59.4 psi}
Parts & tools for this job For 2006 Mazda MX-5
- PARTFuel filterSearch: Mazda MX-5 2006 fuel filter
- TOOLFuel pressure test kitSearch: fuel pressure test kit
- TOOLFuel line disconnect toolSearch: fuel line disconnect tool
As an Amazon Associate we earn from qualifying purchases.