Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)08 · Steering
08 · Steering & suspension

Hermetic sealing inspection

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Power Steering › Hermetic sealing inspection
SteeringHermetic sealing inspection
STEERING – Power Steering – figure
Fig. 44: Tightening Locknut
Courtesy of MAZDA MOTORS CORP.

HERMETIC SEALING INSPECTION

  1. Connect the SSTs to the power cylinder section of the gear housing.
  2. Apply 53.3 kPa {400 mmHg, 15.7 inHg} vacuum with a vacuum pump and verify that it is held for at least 30 seconds .
  3. If the vacuum is not held, replace the oil seal.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.