Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)08 · Steering
08 · Steering & suspension

Steering shaft inspection

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Power Steering › Steering shaft inspection
SteeringSteering shaft inspection
  • The steering wheel effort varies with conditions as shown below.
  • Road conditions, such as dry or wet, and asphalt or concrete.
  • Tire conditions, such as brand, wear, and tire pressure.

STEERING SHAFT INSPECTION

  1. Inspect the following.
  2. Column bearing for damage
  3. Steering shaft length
    • Replace the steering shaft component as necessary.

Steering shaft length

247.3 mm {9.736 in}

STEERING – Power Steering – figure
Fig. 9: Identifying Steering Shaft Length
Courtesy of MAZDA MOTORS CORP.
  1. Inspect the tilt operation.
  2. Verify that the adjusting lever moves smoothly from unlock position to lock position.
  3. Verify that the steering shaft is fixed firmly when the adjusting lever is locked.
    • Replace the steering shaft component as necessary.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.