Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)08 · Steering
08 · Steering & suspension

Tie rod inspection

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Power Steering › Tie rod inspection
SteeringTie rod inspection
STEERING – Power Steering – figure
Fig. 30: Measuring Rotational Torque Of Ball Joint
Courtesy of MAZDA MOTORS CORP.

TIE ROD INSPECTION

  1. Inspect the tie rod for bending and damage. Replace it if necessary.
  2. Inspect the ball joint for looseness. Replace the tie rod if necessary.
  3. Swing the tie rod five times.
  4. Measure the swinging torque using a pull scale.

Tie-rod swing torque

0.1-4.1 N.m {1.1-41.8 kgf.cm, 1.0-36.2 in.lbf}

[Pull scale reading: 0.6-24.4 N {0.06-2.49 kgf, 0.2-5.4 lbf}]

  1. If not within the specification, replace the tie rod.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.