Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)08 · Steering
08 · Steering & suspension

Steering wheel and column inspection

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Power Steering › Steering wheel and column inspection
SteeringSteering wheel and column inspection
STEERING – Power Steering – figure
Fig. 6: Inspecting Fluid Pressure (Valve Open)
Courtesy of MAZDA MOTORS CORP.
  1. Remove the SSTs . Install and tighten the pressure pipe to the specified torque.

Tightening torque

29.4-44.1 N.m {3.00-4.49 kgf.m, 21.7-32.5 ft.lbf}

  1. Bleed the air from the system.

STEERING WHEEL AND COLUMN INSPECTION

STEERING WHEEL PLAY INSPECTION

  1. With the wheels in the straight-ahead position, gently turn the steering wheel to the left and right and verify that the play is within the specification.
    • If the play exceeds the specification, either the steering joints are worn or the backlash of the steering gear is excessive. Correct as necessary.

Steering wheel play

0-30 mm {0-1.18 in}

STEERING WHEEL LOOSENESS INSPECTION

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.