Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)08 · Steering
08 · Steering & suspension

Steering gear and linkage inspection

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Power Steering › Steering gear and linkage inspection
SteeringSteering gear and linkage inspection
STEERING – Power Steering – figure
Fig. 28: Disassembling Mounting Rubber
Courtesy of MAZDA MOTORS CORP.

STEERING GEAR AND LINKAGE INSPECTION

RACK INSPECTION

  1. Inspect the rack for cracking, damage, and tooth wear. Replace it if necessary.
  2. Measure the runout of the rack.

Steering rack runout

Near point A: 0.08 mm {0.003 in} max.

Near point B: 0.15 mm {0.006 in} max.

  1. If not within the specification, replace the rack.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.