Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)08 · Steering
08 · Steering & suspension

Pinion plug assembly note

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Power Steering › Pinion plug assembly note
SteeringPinion plug assembly note
STEERING – Power Steering – figure
Fig. 40: Crimping Cylinder End Using Flathead Screwdriver
Courtesy of MAZDA MOTORS CORP.

PINION PLUG ASSEMBLY NOTE

  1. Tighten the pinion plug using the SST .

Tightening torque

39.2-44.1 N.m {4.00-4.49 kgf.m, 29.0-32.5 ft.lbf}

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.