Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)08 · Steering
08 · Steering & suspension

Steering lock mounting bolts removal note

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Power Steering › Steering lock mounting bolts removal note
SteeringSteering lock mounting bolts removal note
  1. Set the vehicle in the straight-ahead position.
  2. Remove the steering wheel using a suitable puller.

STEERING LOCK MOUNTING BOLTS REMOVAL NOTE

  1. Make a groove in the heads of the steering lock mounting bolts using a chisel and a hammer.
  2. Remove the bolts using a screwdriver.
  3. Disassemble the steering lock component.
STEERING – Power Steering – figure
Fig. 12: Removing Bolts Using Screwdriver
Courtesy of MAZDA MOTORS CORP.

STEERING LOCK MOUNTING BOLTS INSTALLATION NOTE

  1. Assemble the steering lock component to the steering shaft.
  2. Verify that the lock operates correctly.
  3. Install new steering lock mounting bolts.
  4. Tighten the bolts until the heads break off.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.