Power steering fluid inspection
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- Power Steering › Power steering fluid inspection
SteeringPower steering fluid inspection
CAUTION: Do not turn the steering wheel during the fluid level inspection, otherwise the fluid level changes and cannot be inspected correctly.
- Inspect the fluid level. (See POWER STEERING FLUID INSPECTION .)
- Jack up the front of the vehicle and support it on safety stands.
- Turn the steering wheel fully to the left and right several times with the engine not running.
- Reinspect the fluid level.
- If it has dropped, add fluid.
- Repeat Steps 3 and 4 until the fluid level stabilizes.
- Lower the vehicle.
- Start the engine and let it idle.
- Turn the steering wheel fully to the left and right several times.
- Verify that the fluid is not foamy and that the fluid level has not dropped.
- If the fluid level has dropped, add fluid as necessary and repeat Steps 8 and 9.
POWER STEERING FLUID INSPECTION
FLUID LEVEL INSPECTION
- Inspect the power steering fluid level.
- Add fluid to the specified level as necessary.
Power steering fluid type
ATF M-III or equivalent (e.g. Dexron®RII)
Power steering fluid capacity (approximate quantity)
1.19 L {1.25 US qt, 1.04 Imp qt}
FLUID LEAKAGE INSPECTION
- Start the engine and let it idle.
- Turn the steering wheel fully to the left and right to apply fluid pressure.
CAUTION: If the steering wheel is kept in the fully turned position for more than 5 seconds, the fluid temperature will rise excessively and adversely affect the oil pump.
- Inspect for fluid leakage.
- If fluid leakage is found, replace related pipe or hose.
Parts & tools for this job For 2006 Mazda MX-5
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Mazda power steering fluid
As an Amazon Associate we earn from qualifying purchases.