Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)08 · Steering
08 · Steering & suspension

Tie-rod end inspection

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Power Steering › Tie-rod end inspection
SteeringTie-rod end inspection
STEERING – Power Steering – figure
Fig. 29: Measuring Rack Runout
Courtesy of MAZDA MOTORS CORP.

TIE-ROD END INSPECTION

  1. Inspect the tie-rod end for damage and boot cracks. Replace it if necessary.
  2. Inspect the ball joint for looseness. Replace the tie-rod end if necessary.
  3. Rotate the ball joint five times.
  4. Measure the rotation torque of the ball joint using the SST and a pull scale.

Tie-rod end rotational torque

0.4-3.0 N.m {3.5-30.5 kgf.cm, 3.1-26.5 in.lbf}

[Pull scale reading: 3.5-29.9 N {0.35-3.05 kgf, 0.8-6.7 lbf}]

  1. If not within the specification, replace the tie-rod end.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.