Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)08 · Steering
08 · Steering & suspension

Steering wheel effort inspection (page 2 of 2)

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Power Steering
SteeringSteering wheel effort inspection · page 2 of 2

bag module. (See AIR BAG SYSTEM SERVICE WARNINGS .) (See AIR BAG SYSTEM SERVICE CAUTIONS .)

  1. Start the engine and warm the power steering fluid to 50-60°C {122-140°F} .
  2. Measure the steering wheel effort using a torque wrench.
    • If not within the specification, verify the following:
    • No air in steering system
    • No fluid leakage at hose or connectors
    • Function of oil pump and steering gear

Steering wheel effort

7.8 N.m {80 kgf.cm, 58 in.lbf} max.

STEERING – Power Steering – figure
Fig. 8: Measuring Steering Wheel Effort Using Torque Wrench
Courtesy of MAZDA MOTORS CORP.

NOTE: To determine whether the steering effort is satisfactory or not, perform the inspection on another vehicle of the same model and under the same conditions, and compare the results.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.