EM - Engine Mechanical: ENGINE OVERHAUL - Nissan 200SX S12 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 200SX Nissan 200SX S12 1986 Workshop Manual
- Section
- General › EM - Engine Mechanical: ENGINE OVERHAUL - Nissan 200SX S12 Workshop Manual
EM - Engine Mechanical: ENGINE OVERHAUL
ENGINE OVERHAUL
Disassembly Inspection
PISTON AND CRANKSHAFT
PISTON AND PISTON PIN CLEARANCE
1. Place engine on work stand, * Confirm the fitting of piston pin into piston pin hole to such an extent that it can be ‘Kv10108100 (= Dressed smoothly by finger at roam temper- Kv10106800 ature. Piston pin to piston clearance: 0,008 - 0.012 mm (0.0003 - 0.0005 in) Apply engine oil to piston pin.
Drain coolant and oil. Remove timing belt. Remove water pump. Remove oll pan and oil pump. Remove cylinder head. emis Remove pistons. Remove bearing cap and crankshaft,
PISTON RING SIDE CLEARANCE
Max. limit of side clearance {Top and 2nd ring 0,1 mm (0.004 in)
SENBEAA Place the bearings and caps in their proper order. Upper bearings (Cylinder block side) have oil semoz4a, groove, ‘Standard side clearance: Top
0.040 - 0.073 mm {0.0016 - 0.0029 in) 2nd
0.030 - 0,063 mm (0.0072 - 0,025 in)
EM-25
Parts & tools for this job For Nissan 200SX
- PARTEngine gasket setSearch: Nissan 200SX engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.