EM - Engine Mechanical: ENGINE REMOVAL - Nissan 200SX S12 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 200SX Nissan 200SX S12 1986 Workshop Manual
- Section
- General › EM - Engine Mechanical: ENGINE REMOVAL - Nissan 200SX S12 Workshop Manual
EM - Engine Mechanical: ENGINE REMOVAL
ENGINE REMOVAL
Adjusting Rear Mounting Insulator
—.
{Automatic transmission}
WARNING:
8. Situate vehicle on as flat and solid a surface Adjust rear mounting stopper clearance “X” to as possible, 13#1.5 mm (0.51£0.059 in), b, Place chocks at front and rear of rear wheels. Floor Tranes ¢. You should not remove engine until exhaust system has completely cooled off. Otherwise, you may bum yourself and/or fire may break out in the fuel line,
d. For safety during subsequent steps, the tension ‘of wires or chains should be slackened against ‘the engine.
CAUTION: 4, Befora disconnecting fue! hose, release fuel senna pressure from fuel line, Refar to the “Releasing Fuel Pressure” in section EF. b, In lifting engine, be careful not to hit it against adjacent parts, especially against brake tube and brake master cylinder. ¢, Do not loosen front engine mounting insulator cover securing nuts. When cover is removed, damper oil flows out ‘and mounting insulator will not function,
Be not loosen
serai2
EM-23
Parts & tools for this job For Nissan 200SX
- PARTEngine gasket setSearch: Nissan 200SX engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.