EM - Engine Mechanical: ENGINE OVERHAUL - Nissan 200SX S12 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 200SX Nissan 200SX S12 1986 Workshop Manual
- Section
- General › EM - Engine Mechanical: ENGINE OVERHAUL - Nissan 200SX S12 Workshop Manual
EM - Engine Mechanical: ENGINE OVERHAUL
ENGINE OVERHAUL
Inspection {Cont‘d)
Assembly
FLYWHEEL RUNOUT
PISTON Runout (Total indicator reading):
1. Assemble piston with connecting rod Less than 0.18 mm (0.0059 in) 8, Numbers stomped on the connecting rod and ap correspond to each cylinder. Cars shoutd be taken to avoid a wrong combination includ- ing bearing.
(noteht Semazea Cylinder No. SEMseD8 Install ring on flywheel, heating ring gear to about 180 to 220°C {356 to 428°F). b, When pressing piston pin in connecting rod, oil to pin and small end of con. i;
CONNECTING ROD BEND AND TORSION
Bend and torsion: Limit 0.1 mm (0,004 in) per 100 mm (3.94 in} length
emis ¢. After assembling, ascertain that piston swings M339 smoothly. When reptacing connecting rod, select one so that weight difference batween each cylinder is within 7g (0.28 oz} with piston and connecting rod assembled,
EM-31
Parts & tools for this job For Nissan 200SX
- PARTEngine gasket setSearch: Nissan 200SX engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.