OIL SEAL REPLACEMENT - Nissan 200SX S12 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 200SX Nissan 200SX S12 1986 Workshop Manual
- Section
- General › OIL SEAL REPLACEMENT - Nissan 200SX S12 Workshop Manual
OIL SEAL REPLACEMENT
OIL SEAL REPLACEMENT
Replacement of Valve Oil Seal
Remove rocker cover. 1,
6. Apply engine oil to valve oil seal and install it Remove rocker shaft assembly.
2. In place.
3. Remove spark plug. Before installing valve oif seal, install valva spring
4. Install air hose adapter into spark plug hole and, apply air pressure to hold valves in place [Apply pressure of 490 kPa {5 ka/cm?, 71 psi}] . Whan performing this operation piston should be sot at T.D.C,
v10107500 c= Isemsona
Valve ll sead “Compressed elt semase 23 jo.0991 Volve spring aot 5, Remove valve spring and valve oil seal.
10 40:03) ‘Uni: men tind seMae7A,
SEMB75A
EM-21
Parts & tools for this job For Nissan 200SX
- PARTOil filterSearch: Nissan 200SX oil filter
- TOOLOil filter wrenchSearch: oil filter wrench
- FLUIDEngine oilSearch: Nissan 200SX engine oil
As an Amazon Associate we earn from qualifying purchases.