TIMING BELT - Nissan 200SX S12 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 200SX Nissan 200SX S12 1986 Workshop Manual
- Section
- General › TIMING BELT - Nissan 200SX S12 Workshop Manual
TIMING BELT
TIMING BELT
Installation
1. Confirm that No, 1 cylinder is set at T.D.C. on its compression stroke.
Semone 3, Set timing belt. 8, Ensure that timing beit is clean and free of oi ‘or water, Do not bend it. 4
b.
Align white IInes on timing belt with punct
mark on camshaft pulleys and crankshaft
‘Mark
‘Mark on belt
pulley. semeza
c.
Have arrow on timing belt pointing toware
front belt covers,
2. Install tensioner and return spring,
4. Tighten belt tensioner and assemble spring.
semezs
If coarse stud is once removed, apply locking sealer Bore SEMBz8 to threads of stud before installing.
To set spring, first hook one snd on bolt ® side,
Make sure that tensioner bolts are not securely
then hook the other end on tensioner bracket
tightened before drive belt is installed. pawl. After rotating crankshaft two turns Confirm that tensioner putley can clockwise, be rotated tighten bolt @ and then bolt @, and smoothly. belt tension will automatically be the specified valui ©: 15-20N-m {1.5 -2.0 kgm, 11-14 fttb)
EM-3
Parts & tools for this job For Nissan 200SX
- PARTTiming belt kitSearch: Nissan 200SX timing belt kit
- TOOLEngine timing tool setSearch: Nissan engine timing tool set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
As an Amazon Associate we earn from qualifying purchases.