Workshop Manuals Factory service & repair Rover
Rover 400 Workshop Manual (1995-2000)14 · Cooling system
14 · Engine

Coolant pump - ’d’ series - 97.5 my on

Make
Rover
Model
400 Workshop Manual
Year
1995–2000
Section
Repairs › Coolant pump - ’d’ series - 97.5 my on
Cooling systemCoolant pump - ’d’ series - 97.5 my on

COOLANT PUMP - ’D’ SERIES - 97.5 MY ON

Service repair no - 26.50.01

Remove

  1. Drain cooling system. See Adjustments.
  2. Remove camshaft timing belt. See ENGINE - ’D’ SERIES, Repairs.
Coolant pump - ’d’ series - 97.5 my on – Remove camshaft timing belt. See ENGINE - ’D’ SERIES, Repairs.
  1. Remove bolt securing fuel rail support bracket.
  2. Remove support bracket.
  3. Remove 2 bolts securing alternator bracket to coolant pump and cylinder head.
  4. Move bracket clear of coolant pump.
  5. Remove 4 bolts securing coolant pump.
  6. Remove coolant pump, remove and discard ’O’ ring.

Refit

  1. Clean coolant pump and cylinder block mating faces.
  2. Fit NEW ’O’ ring to coolant pump.
  3. Fit pump and tighten bolts to 12 Nm.
  4. Align alternator bracket, fit bolts and tighten to 44 Nm.
  5. Fit fuel rail support bracket, fit bolt and tighten to 44 Nm.
  6. Fit timing belt. See ENGINE - ’D’ SERIES, Repairs.
  7. Refill cooling system,See Adjustments.

Parts & tools for this job For 1995 Rover 400

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.