Heating and ventilation
- Make
- Rover
- Model
- Coupé, Cabriolet & Tourer 200/400 Coupé, Cabriolet & Tourer Workshop Manual Supplement
- Section
- Torque wrench settings › Heating and ventilation
InformationHeating and ventilation
HEATING AND VENTILATION
Heater unit to bulkhead:
| 6 mm nuts/bolts | 10 Nm |
| 8 mm nuts/bolts | 22 Nm |
| Blower motor screws | 9 Nm |
AIR CONDITIONING
| Pipe bracket to condenser bolts | 6 Nm |
| Condenser to fan housing bolts | 9 Nm |
| Trinary switch | 12 Nm |
| Receiver/drier to body bolts | 9 Nm |
| Pipes to receiver/drier bolts | 5 Nm |
| Pipe to pipe unions | 25 Nm |
| Pipe bracket to gearbox bracket bolt | 9 Nm |
| Relay module to body bolts | 9 Nm |
| Expansion valve | 9 Nm |
| Adaptor to expansion valve | 9 Nm |
| Evaporator casing screws | 10 Nm |
| Pipe flange to evaporator bolt | 10 Nm |
| Pipe bracket screw (LH Drive) | 10 Nm |
| Compressor to mounting bracket bolts | 45 Nm |
| Pipe union to compressor | 35 Nm |
| Evaporator pipe to compressor | 45 Nm |
| Condenser pipe to compressor | 25 Nm |
Parts & tools for this job For Rover Coupé, Cabriolet & Tourer
- TOOLA/C manifold gauge setSearch: AC manifold gauge set
- TOOLUV leak detection kitSearch: AC UV leak detection kit
- PARTCabin filterSearch: Rover Coupé, Cabriolet & Tourer cabin filter
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.