Steering
- Make
- Rover
- Model
- Coupé, Cabriolet & Tourer 200/400 Coupé, Cabriolet & Tourer Workshop Manual Supplement
- Section
- Torque wrench settings › Steering
InformationSteering
STEERING
| Steering wheel nut | 50 Nm |
| Steering column lower clamp bolt/nut | 22 Nm |
| Steering column upper bracket nuts | 12 Nm |
| Steering column upper bracket bolts | 22 Nm |
| Steering column universal joint bolts | 28 Nm |
| Track-rod ball pin Nyloc nut | 45 Nm |
| Steering rack clamp bolts | 38 Nm |
| Steering rack pinion flange bolts | 58 Nm |
| Steering rack feed pipe union | 37 Nm |
| Steering rack return pipe union | 28 Nm |
| Steering pipe clip | 9 Nm |
| Steering arm ball joint Nyloc nut | 45 Nm |
| Steering pump adjuster clamp bolt | 25 Nm |
| Steering pump mounting bracket bolts | 25 Nm |
| Steering pump pulley bolts | 9 Nm |
| Steering pump outlet hose union | 55 Nm |
SUSPENSION
| Road wheel nuts1 | 110 Nm |
Front Suspension
| Anti-roll bar link to lower arm bolt | 60 Nm |
| Anti-roll bar to link bolt | 45 Nm |
| Anti-roll bar clamp to rear beam bolts | 22 Nm |
| Damper shaft nut | 2 40 Nm |
| Damper top mounting nuts2 | 30 Nm |
| Damper to hub pinch bolt2 | 80 Nm |
| Lower arm front pivot bolt | 45 Nm |
| Lower arm ball joint nut | 55 Nm |
| Upper arm ball joint nut | 30 Nm |
| Tie-rod to lower arm bolts | 80 Nm |
| Tie-rod to front beam nut | 45 Nm |
| Front beam to body bolts | 100 Nm |
| Rear beam to body bolts | 100 Nm |
1Tighten in diagonal sequence
2Tighten with weight of vehicle on suspension.
Parts & tools for this job For Rover Coupé, Cabriolet & Tourer
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Rover power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.