Manifold and exhaust
- Make
- Rover
- Model
- Coupé, Cabriolet & Tourer 200/400 Coupé, Cabriolet & Tourer Workshop Manual Supplement
- Section
- Torque wrench settings › Manifold and exhaust
InformationManifold and exhaust
MANIFOLD AND EXHAUST
| Exhaust front pipe to catalyst nuts | 50 Nm |
| Catalyst to intermediate pipe nuts | 50 Nm |
| Intermediate pipe to tail pipe nuts | 1 50 Nm |
| Inlet manifold to cylinder head nut and bolts | 25 Nm |
| Inlet manifold to support bracket bolt | 1 25 Nm |
| Exhaust manifold to cylinder head nuts | 45 Nm |
| Alternator heat shield, bolts | 10 Nm |
| Support bracket to exhaust manifold nuts | 25 Nm |
| Exhaust front pipe to manifold nuts | 50 Nm |
CLUTCH
Pressure plate to flywheel Torx bolts:1
| 1.6 | 18 Nm |
| 1.8 | 26 Nm |
1Tighten in diagonal sequence
Parts & tools for this job For Rover Coupé, Cabriolet & Tourer
- PARTExhaust gasketSearch: Rover Coupé, Cabriolet & Tourer exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.