Workshop Manuals Factory service & repair Alfa Romeo
01 Introduction and contents02 Technical data and maintenance03 Engine04 Clutch05 Gearbox06 Front axle and drive shafts07 Brakes08 Steering09 Suspension and wheels10 Heating and ventilation11 Bodywork12 Timing belt data sheets
Alfa Romeo 145/146 Factory Service Manual (1994-1999)11 · Bodywork
11 · Body & interior

Adjustment (page 2 of 2)

Make
Alfa Romeo
Model
145/146 Factory Service Manual
Year
1994–1999
Section
Doors
BodyworkAdjustment · page 2 of 2
  1. Slacken the three upper screws fastening the utility pocket.
Diagram showing three upper screws fastening the utility pocket, labeled as 1.
  1. Remove the speaker protection grille proceeding as follows:
  • using a suitable tool (eg. small, flat screwdriver) press on the upper catch (a) hooking the grille to the door panel;
  • proceed as described for the previous step on the rear catch (b);
  • remove the grille.
  1. Slacken the three screws fastening the speaker compartment to the body.
Diagram showing speaker protection grille with upper catch (a) and rear catch (b), and screws labeled as 1 and 2.
  1. Remove the power window switches complete with plate from their housing.
Diagram showing power window switches and a fastening screw, labeled as 1.
  1. Disconnect the electrical connections from the power window switches and remove the switches.
  2. Slacken the fastening screw in the switch compartment.
Diagram showing electrical connections and a fastening screw, labeled as 1 and 2.
  1. Remove the plastic cap, slacken the fastening screw and remove the door opening handle plate.
Diagram showing door opening handle plate with a fastening screw, labeled as 1.

Parts & tools for this job For 1994 Alfa Romeo 145/146

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.