VARIATION OF THE MEMORISED SPEED

To change the memorisation of the car speed corresponding to the moment when it was memorised, it is necessary to:

Speed increase:

• operate the ring switch towards the (+) mark: an acceleration ramp is produced at a constant gradient which can be programmed;
• on release of the switch (automatic return of the switch), the system maintains and memorises the new speed reached by the car.

Speed reduction:

• operate the ring switch towards the (-) mark: the car speed is reduced in relation to that set previously by the Cruise Control; release the button and the system will maintain the new speed reached by the car.

The Cruise Control can operate within the full range of rpm permitted by the engine, for both versions with automatic transmission on CAN network and versions with manual gearbox.