Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Ignition coils

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Fuel system (98 range, 1581 16v) › Ignition coils
10 EngineIgnition coils
View of ignition coils bracketed onto the camshaft covers in the engine bay

IGNITION COILS

(Bae 920A)

(Beru 0.040.100.029)

The coils are bracketed onto the camshaft covers; they are of the closed magnetic circuit type, formed by a segment pack whose central core, broken by a thin gap, carries both windings.

The windings are located in a moulded plastic container and encapsulated in an epoxy resin and quartz compound which gives them exceptional dielectric, mechanical and thermal properties, as they can withstand high temperatures. The vicinity of the primary to the magnetic core reduces magnetic flow losses, ensuring maximum connection to the secondary.

Diagram of the ignition coil unit showing numbered H.T. and L.T. connectors, primary and secondary circuits, and gap
  1. H.T. connector for cylinder 1 plug
  2. H.T. connector for cylinder 2 plug
  3. H.T. connector for cylinder 3 plug
  4. H.T. connector for cylinder 4 plug
  5. L.T. connector for control unit connection
  6. Primary circuit
  7. Gap
  8. Secondary circuit

Wiring connector

NOTE The numbers in boxes indicate the corresponding control unit pins.

Schematic wiring diagram of the ignition coil showing connections to +12V, control unit pins 59 and 66, and spark plugs 1-4
Diagram of the wiring connector showing pins 1 and 2 connected to control unit pins 59 and 66 respectively, with +12V supply

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.