Removing - refitting lambda probe

Make

Fiat

Model

Bravo /Brava (182) Factory Service Manual

Year

1995–2001

Section

Fuel system (98 range, 1581 16v) › Removing - refitting lambda probe

10 EngineRemoving - refitting lambda probe

Removing - refitting lambda probe

• Place the car on ramps.
• Disconnect the battery's negative cable.
• Disconnect the wiring connector installed against the rear wall of the engine compartment.

Remove the Lambda probe from its seating on the exhaust pipe.

When refitting, smear ANTISEIZE MATERIA-BORON NITRIDE N.G.K. SPARK PLUG CO-LTD. grease on the threaded part.

Tightening torque 3.5 - 4.5 daNm

02 Engine