Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Removing-refitting fuel tank

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Fuel system (98 range, 1581 16v) › Removing-refitting fuel tank
10 EngineRemoving-refitting fuel tank

REMOVING-REFITTING FUEL TANK

Diagram showing the removal of the boot trim using wrench 1878077000 and the protective cover with attachment screws.
Before removing-refitting the tank, drain the fuel, place the car on ramps and disconnect the battery's negative pole. Then proceed as follows:
  • Lift the boot trim after removing the retaining buttons using the wrench 1878077000. Remove the protective cover shown in the insert by undoing the attachment screws.
Diagram showing the disconnecting of wiring connections from the pump and fuel gauge sender unit, vent pipe (1), fuel return pipe (2) and delivery pipe (3), and the undoing of ring nut securing the electric pump using tool 1860893000.
  • Disconnect the wiring connections from the pump and fuel gauge sender unit. Disconnect the vent pipe (1) by undoing the retaining nut, and the fuel return pipe (2) and delivery pipe (3) by undoing the retaining clips.
  • Undo the ring nut securing the electric pump to the tank using tool 1860893000 together with a ring spanner.
Diagram showing the undoing of the cap and removal of the fuel filler gaiter from its seating.
  • Undo the cap and remove the fuel filler gaiter from its seating.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.