Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Removing-refitting throttle cable

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Fuel system (98 range, 1581 16v) › Removing-refitting throttle cable
10 EngineRemoving-refitting throttle cable
Two diagrams showing the removal of a clip from the accelerator pedal linkage using a tool.
Diagram of the engine compartment showing the throttle valve lever (1) and throttle cable (2).
Diagram showing the removal of the throttle cable rubber buffer from the bulkhead wall anchorage hole.

REMOVING-REFITTING THROTTLE CABLE

Disconnect the battery lead then proceed as described below:

  1. Working from inside the car, disconnect the throttle cable from its attachment on the accelerator pedal.
  2. In the engine compartment, rotate the throttle valve lever (1) and disconnect the throttle cable. Then withdraw the cable (2) from the mounting bracket.
  3. Withdraw the rubber buffer from the anchorage hole on the bulkhead wall, and withdraw the complete throttle cable.
  4. Complete throttle cable.
Diagram of the complete throttle cable assembly.

When fitting, adjust the throttle cable as described in the "Adjusting throttle cable" section.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.