Refitting (page 3 of 3)

(Cont. Op. 5040C24)

1. Unscrew the fastening screws and remove the passenger compartment air fan relay support (1a) with the ignition switch power supply fuse (1b)

2. Take out the wiring bundle from the right half-box.

1. Unscrew the fastening screws and separate the air conditioner box shells.
2. Take out the upper air distribution flap.
3. Take out the lower/front air distribution flap.

1. Remove the rivet, taking off the head with a drill.
2. Unscrew the fastening screws and remove the air fan air duct group with the air intake/recirculation flap.3. Remove the air conditioner system wiring bundle.

1. Unscrew the fastening screws and remove the fan air conveyor half-shell.

1. Remove the air intake/recirculation flap control.
2. Raise the stop tab and take out the air intake/recirculation flap control lever.
3. Raise the stop clip and take out the air intake/recirculation flaps toothed sectors.
4. Unscrew the screws and separate the shells from the air intake/recirculation flaps box.
5. Take out the air intake flap.

(Cont.d.)