Engine oil recovery pipe - r + r

Operation 1080D30 · Crankcase vapour/gas recirculation system

1.9 JTD 16v

Removing

Place the car on a lift.

- 7055B54 under-engine guard - r r

1. Disconnect the engine oil recovery pipe from the separator.

2. Disconnect the engine oil recovery pipe from the oil sump.

3. Remove the enigne oil recovery pipe from the lower part of the engine compartment.

Refitting

Fit the engine oil recovery pipe and connect it to the engine oil sump.

Connect the engine oil recovery pipe to the engine oil vapour separator.

- 7055B54 under-engine guard - r r

Remove the vehicle from the lift.