Lambda sensor - r.r.
- Make
- Fiat
- Model
- Stilo Factory Service Manual
- Year
- 2001–2007
- Section
- Exhaust emission control system › Lambda sensor - r.r.
LAMBDA SENSOR - R.R.
Removing
Position the vehicle on the ramp
- 5530B56 BATTERY DRIP TRAY COVER - R.R.
Disconnect the battery negative terminal.
1. Disconnect the electrical connection for the Lambda sensor.
1. Release the electrical wiring for the Lambda sensor from the fastenings.
2. Undo and remove the Lambda sensor complete with electrical wiring.
Refitting
Place the Lambda sensor back in its housing and tighten it to the recommended torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| LAMBDA PROBE | M18 | 4.1 ÷ 5.0 |
Secure the electrical wiring for the Lambda sensor to the fastenings.
Connect the electrical connection for the Lambda sensor.
Connect the battery negative terminal.
- 5530B56 BATTERY DRIP TRAY COVER - R.R.
Remove the car from the ramps.
Parts & tools for this job For 2001 Fiat Stilo
- PARTOxygen sensorSearch: Fiat Stilo 2001 oxygen sensor
- TOOLOxygen sensor socketSearch: oxygen sensor socket
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.