Engine oil vapour recirculation flame trap - repl.
- Make
- Fiat
- Model
- Stilo Factory Service Manual
- Year
- 2001–2007
- Section
- Exhaust emission control system › Engine oil vapour recirculation flame trap - repl.
EngineEngine oil vapour recirculation flame trap - repl.
Engine oil vapour recirculation flame trap - repl.
Removing
1. Disconnect the oil vapour recovery pipe (1a) from the vent on the tappet cover (1b).
2. Remove flame trap
Removing
1. Disconnect the oil vapour recovery pipe (1a) from the vent on the tappet cover (1b).
2. Remove flame trap.
Refitting
Fit the flame trap in its seating.
Connect the oil vapour recovery pipe to the vent on the tappet cover.
Refitting
Fit the flame trap in its seating.
Connect the oil vapour recovery pipe to the vent on the tappet cover.
Parts & tools for this job For 2001 Fiat Stilo
- PARTEngine gasket setSearch: Fiat Stilo 2001 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.