SRS warning light bulbs (page 2 of 2)
- Make
- Land Rover
- Model
- Discovery Body Repair Manual
- Year
- 1995 on
- Section
- Repair
Supplementary restraint systemSRS warning light bulbs · page 2 of 2
Refit
- Reverse removal procedure.
- Fit new warning light bulbs.
- Carefully fit warning light housing, ensuring that
- Ensure that tachometer needle is on the correct
- Fit instrument binnacle.
- Carefully remove 2 screws securing face plate to tachometer.
- Release warning light housing from tachometer circuit board.
- Carefully (to avoid damage to tachometer needle and spindle), tilt and remove warning light housing.
- Remove 2 warning light bulbs.
locating pegs engage correctly and that retaining clips lock housing into position.
side of its stop. See ELECTRICAL, Repair.
Parts & tools for this job For 1995 Land Rover Discovery
- PARTReplacement bulbsSearch: Land Rover Discovery 1995 bulbs
- TOOLDigital multimeterSearch: automotive digital multimeter
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.