Engine - Td5 (page 3 of 3)
- Make
- Land Rover
- Model
- Discovery II (UK)
- Section
- General data
General dataEngine - Td5 · page 3 of 3
| Camshaft | |
|---|---|
| Bearings | 6 |
| Drive | Duplex chain |
| End float | 0.06-0.16 mm (0.002-0.006 in) |
| Tappets | |
| Type | Hydraulic lash adjusters with followers |
| Valves | |
| Stem diameter: | |
| Exhaust | 6.905 ± 0.008 mm (0.271 ± 0.0003 in) |
| Inlet | 6.915 ± 0.008 mm (0.272 ± 0.0003 in) |
| Head diameter: | |
| Exhaust | 31.7 mm (1.25 in) |
| Inlet | 34.7 mm (1.37 in) |
| Seat face angle: | |
| Exhaust | 45° |
| Inlet | 30° |
| Valve face angle: | |
| Exhaust | 44° 48' ±12' |
| Inlet | 29° 48' ±12' |
| Valve springs | |
| Type | Parallel, single coil |
Parts & tools for this job For Land Rover Discovery
- PARTEngine gasket setSearch: Land Rover Discovery engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.