Torque wrench settingsHeating and air conditioning
Heating and air conditioning
| TORQUE DESCRIPTION | METRIC | IMPERIAL |
|---|
| Heater assembly | 16 Nm | (12 lbf.ft) |
| Compressor bolts | 22 Nm | (16 lbf.ft) |
| Blower motor | 19 Nm | (14 lbf.ft) |
| Compressor to mounting bracket bolts | 25 Nm | (18 lbf.ft) |
| A/C pipes to compressor bolts | 10 Nm | (7 lbf.ft) |
| Condenser pipe bolt | 5 Nm | (3.7 lbf.ft) |
| Receiver drier to bracket bolts | 5 Nm | (3.7 lbf.ft) |
| Adaptor block to receiver drier bolt | 5 Nm | (3.7 lbf.ft) |
| Evaporator pipe bolts | 5 Nm | (3.7 lbf.ft) |
| Dual pressure switch to receiver drier | 10 Nm | (7 lbf.ft) |
| Air conditioning pipes to receiver drier bolts | 5 Nm | (3.7 lbf.ft) |
| TX valve pressure pipe union | 22 Nm | (16 lbf.ft) |
| Evaporator pipe to TXV valve | 32 Nm | (24 lbf.ft) |
| Evaporator assembly to body bolts | 16 Nm | (12 lbf.ft) |
| High and low pressure pipe, bolts | 10 Nm | (7 lbf.ft) |
| Fuel burning heater Torx bolts | 25 Nm | (18 lbf.ft) |
Wipers and washers
| TORQUE DESCRIPTION | METRIC | IMPERIAL |
|---|
| Link to motor spindle | 7 Nm | (5.2 lbf.ft) |
| Front motor assembly | 2.5 Nm | (1.8 lbf.ft) |
| Spindle nut | 3 Nm | (2.2 lbf.ft) |
| Wiper arm nut | 13 Nm | (10 lbf.ft) |
Electrical
| TORQUE DESCRIPTION | METRIC | IMPERIAL |
|---|
| Alternator support stay | 25 Nm | (18 lbf.ft) |
| Alternator lead - Td5 | 6 Nm | (4.4 lbf.ft) |
| Auxiliary drive belt tensioner bolt | 50 Nm | (37 lbf.ft) |
| Alternator pulley | 80 Nm | (59 lbf.ft) |
| Alternator B+ nut - V8 | 18 Nm | (13 lbf.ft) |
| Alternator B+ nut - V8 | 5 Nm | (3.7 lbf.ft) |
| Starter motor - Td5 | 27 Nm | (20 lbf.ft) |
| Starter motor solenoid | 10 Nm | (7 lbf.ft) |
| Starter motor - V8 | 44 Nm | (32 lbf.ft) |
| Alternator | 45 Nm | (33 lbf.ft) |
| Starter motor heat shield - V8 | 10 Nm | (7 lbf.ft) |
| Horn | 13 Nm | (10 lbf.ft) |
| Battery carrier bolts | 28 Nm | (21 lbf.ft) |
05 General
