Harness - solenoid valve
- Make
- Land Rover
- Model
- Range Rover L322 Range Rover Service Procedures
- Section
- REPAIRS › Harness - solenoid valve
AUTOMATIC TRANSMISSION - ZF 5HP24
REPAIRS
44-2-9
Harness - solenoid valve
$% 44.15.52
Remove
1. Remove gearbox fluid filter.
5HP24, REPAIRS, Filter - fluid.
2. Disconnect multiplug from gearbox.
3. Remove retaining clip from multiplug and
release plug from gearbox casing.
4. Remove 2 Torx bolts securing speed sensor
clamps, remove clamps and sensors.
5. Evenly and progressively loosen and remove
22 large shouldered Torx bolts from valve
block.
6. Remove valve block assembly.
7. Noting fitted position, disconnect 10 multiplugs
from sensors and solenoids.
8. Remove harness, remove and discard 'O' rings.
M44 1905
M44 1906
Parts & tools for this job For Land Rover Range Rover
- PARTEngine gasket setSearch: Land Rover Range Rover engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.