L322 Range Rover Service Procedures
DRIVESHAFTS
47-2
REPAIRS
14. Using LRT-54-027 release lower arm ball joint
and disconnect lower arm from hub.
CAUTION: Ensure ball joint seal is not
damaged. A damaged seal will lead to
premature failure of the joint.
15. Loosen bolt securing tie rod to subframe one
quarter of a turn.
16. Remove nut securing tie rod to ball joint.
17. Using LRT-54-027 release tie rod from ball joint
CAUTION: Ensure ball joint seal is not
damaged. A damaged seal will lead to
premature failure of the joint.
18. Fit centre screw LRT-60-030/3 to LRT-60-030/
1 and fit to hub with spacer LRT-60-030/2.
Secure with nuts LRT-60-030/5.
19. Tighten centre screw to press drive shaft from
flange.
20. Remove tools.
21. Position container to collect oil spillage.
M60 0789
LRT -54-027
M60 0787
LRT -54-027