L322 Range Rover Service Procedures
LIGHTING
86-2-12 REPAIRS
Switch - combined direction indicator/
headlight
$% 86.65.55
Remove
1. Remove rotary coupler.
2. Depress 2 clips and remove switch from rotary
coupler assembly.
Refit
1. Fit switch to rotary coupler, ensure
engagement of clips.
2. Fit rotary coupler.
Light check module (LCM)
$% 86.77.02
If the LCM is to be replaced then Testbook/T4 must
be connected and correct procedures adhered to,
prior to battery disconnection.
Remove
1. Remove RH lower 'A' post finisher.
Trim finisher - 'A' post - lower.
2. Remove screw securing LCM to 'A' post.
3. Release LCM from mounting and disconnect
multiplugs.
4. Remove LCM.
Refit
1. Position LCM and connect multiplugs.
2. Fit LCM and secure with screw.
3. Fit RH lower 'A' post finisher.
Trim finisher - 'A' post - lower.
4. Configure new LCM using TestBook/T4.
M86 5723