L322 Range Rover Service Procedures
STEERING
REPAIRS
57-11
9. Using LRT-57-036 separate ball pin from
steering arm.
CAUTION: Ensure ball joint seal is not
damaged. A damaged seal will lead to
premature failure of the joint.
10. Disconnect multiplug from PAS rack pinion
sensor.
11. Note fitted position of lower steering column.
Remove Torx bolt from clamp and disconnect
lower steering column from PAS rack. Discard
Torx bolt.
CAUTION: Do not turn the steering wheel
with the lower steering column
disconnected as damage to the rotary
coupler and the steering wheel switches
may occur.
12. Remove bolt securing PAS feed hose to PAS
rack.
13. Position a suitable container below PAS rack to
collect fluid spillage.
M57 1126